Gel Stain is a protective urethane topcoat pigmented with a bit of colored stain

Greystone –lightly pigmented, this translucent warm grey color is reminiscent of stone.

• The tinted color easily hides imperfections and scratches
• This is Fusion Mineral Paint’s toughest of the topcoats
• Useful to tone existing wood color
• A one-step application
• Stir, stir, stir and stir-5 minutes of stirring before using to get it’s settled matte thoroughly mixed-DO NOT SHAKE-it will add air bubbles
• Apply to any surface that is free of grease, wax, dirt, shellac or dust
• Do not use on vinyl, shellac, asphalt or linoleum
• Brush on with natural bristle brush or use microfiber roller to apply!
• Do not use applicator pad or foam roller to apply
• Oil based -use mineral spirits for clean up
• No sanding or de-glossing surface before using
• Ideal for heavily used interior surfaces
• Use on areas that are frequently washed-table tops, bathroom or kitchen countertops
• Extremely durable to refinish  old hardwood floors
• When using on raw wood surfaces-first coat should be 1:4 mineral spirits to Gel Stain
• Topcoat resists water, food stains, alcohol, grease and detergents
• Adheres to difficult surfaces like laminate, melamine, lacquered or painted or coated surfaces.
• Use to create an antiquing effect
• May be recoated after 8 hrs.
• Once your coat is layered on, avoid re-touching the wet surface!
• Fully cures in 5 days
• Self leveling
• One coat looks like a stain.
• Thickness of Gel stain out of the can varies between the 4 colors-some are thick and some are thinner
• Your base substrate color will always show through, but the more coats, the more opaque it becomes
• Satin finish
• Dry time between coats-approx. 4 hrs.
• Cure time is 5 days